Nukote EP Prime II
Nukote EP Prime II is two component, high solids, liquid applied, low viscosity epoxy-polyamine primer surfacer with unique penetrating characteristics. It helps to seal the pores and capillaries and minimize out gassing.
Nukote HLT-P combines three important features into one treatment system: surface activation as a pre-primer, micro-crack sealing with a silica matrix, and water repellency. HLT-P provides heavy duty surface activation via a reactivecolloidal siliconate. HLT-P promotes coating adhesion to concrete, by cross-linking organic and inorganic macro molecules. The reactive lithium silicate colloid penetrates and binds inside micro cracks to available cement hydrates to seal voids and improve surface micro-profiles. Combined with the siliconate water replant, HLT-P provides superior positive and negative pressure water blocking and repellency. HLT-P is formulated to promote aggressive bonding between concrete and Nukote polymer coatings.
Nukote HLT-P reduces the risk of coating failures due to moisture migration and outgassing by blocking moisture migration through the substrate. Nukote HLT-P is suitable for use as a pre-primer under flooring, liners, and adhered waterproofing membranes – including structures subject to hydrostatic pressure. Consult Nukote for a project specific surface evaluation to assist in selecting the best combination of products and application techniques.
Nukote IC Prime is a single component, low solids, liquid applied aromatic urethane polyurea primer. It has been specifically designed and blended for use as an inter-coat adhesion primer-promoter primarily for polyurea and elastomeric surfaces. It can be used when the over coating open window of Nukote polyurea have been exceeded, day joints, for overlapping on aged Polyurea, with Polyurea, Polyurethane and Polyurethane hybrids and in repair and upgrade.
Nukote Metal Prime II is a two component, 100% solids, liquid applied surface tolerant primer. This universal surface tolerant primer has been developed for use on carbon steel, non-ferrous metal, fibreglass, PVC pipe, as well as concreteand masonry. The Primer is suitable to be used with Potable water certified products.
Nukote Metal Prime II is suitable for Power tool prepared substrate to St 2 when environmental, economic or safety concerns restrict abrasive blast cleaning. The extraordinary penetrating properties of Metal Prime II provide exceptional means for reinforcing rusty steel substrates insuring adhesion of subsequent coatings. Improves the effectiveness and efficiency of the coating by penetrating and sealing crevices, joints, back-to-back angles of existing structures and edges of old coatings, improving the service life of the maintenance system. Also serves to seal aged “White Rusted” zinc surfaces for re-coating. Consult with NCSI for special applications.
Nukote SPU Foam
Nukote SPU Foam is a two-component, rigid polyurethane spray foam that is available in different densities to accommodate a broad range of applications. Nukote SPU foam is environment friendly and contains no ozone depleting chemicals. Low viscosities and 1:1 ratio make it extremely easy to apply using standard, high-pressure, high-temperature application equipment.
Nukote Polyprime I
Nukote Polyprime I is a two component 1:1 ratio, rapid setting, non-sag, liquid applied, aromatic urethane polyurea primer suitable for concrete and masonry substrates. Nukote Polyprime I is easy to apply, sets quickly, and has excellent physical properties. Nukote Polyprime I is the ideal primer when dealing with sub- zero temperature.
Nukote Polyprime II
Nukote Polyprime II is a two component 1:1 ratio, rapid setting, low temperature curing liquid applied, aromatic urethane polyurea primer suitable for metal substrates. Nukote Polyprime II is easy to apply, sets quickly, and has excellent physical properties. It can also be used in concrete, and masonry
Premera AE T7LF
Premera AE T7LF is a slow drying and very thin adhesion promoter formulated using controlled chemical nanotechnology. It removes the need to sand between layers of paint and other materials. Premera AE T7LF bonds layers of material together making mechanical abrasion is a thing of the past.
Premera AE T7
Premera AE T7 is a very fast drying and thin nano-adhesive intercoat or primer. T7 is very compatible with many surfaces, and many coatings. Premera AE T7 creates a molecular bridge between a coating and the substrate. Coatings that ordinarily cannot bond to a surface are now able to.
Wechat ID:+60127028806
Wechat ID:+60127028806
