Accuracy...
Accurate dispensing is key for quality end products. With the EFR you can expect accuracy during every dispense.
In Ratio:
The ratio is controlled by our mechanically linked volumetric Z-pumps. These pumps dispense 50% of their nominal volume in each stroke. This allows for accurate ratio control in small shots and in continuous flow
In shot sizes from 0,3 cc to any shot:
With the built in encoder, the flow is continuously conrolled to assure a consistent flow rate. And Graco’s control architecture controls the shot repeatability even during pump changeovers
From start to stop, even during pump changeovers
The electric motor ensures you the correct flow rate from the moment you start to the moment you stop, without any pulsation. The additional automatic calibration makes sure that snake heads at start & tails at the end are eliminated.
Versatility...
Don’t be limited to 1 material or application. The EFR gives you the versatility to choose the flow rate you need with the material you need , whether its for manual or robotic applications.
From low flow to to high flow
-
Lowest Flow: 10 cc/min
-
Highest flows: 3,2 L/min
-
Shot sizes from 0,3 cc
Wide range of Material compatibility
The EFR can be configured to handle a wide range of materials: Thermal interface materials,Epoxies, Silicones, Acrylics, Polysulfide, Urethanes, Filled and unfilled materials
Easy...
The EFR was designed with industry proven technologies for simplified configuration, ease of use and maintenance.
-
Simplified configuration and setup
-
Broader hose selection in lengths and sizes
-
Easy to operate
-
Low maintenance
Wechat ID:+60127028806
Wechat ID:+60127028806
