The Bin unloading system has, similar as other Graco unloading systems, a fast and easy operation. Once the Bin is placed below the Bin Unloader, the ram plate and pump is lowered into the Bin, just above the product. When the pumping starts the product is moved out of the Bin and the plate with inflatable seal travels down into the Bin, scraping product from the sides of the Bin. After the Bin in emptied the plate and pump can get lifted out by simply switching a button.
Air Operated Diaphragm Pump
-
When the material comes in a tote or a bin
-
When high flow rates are required
-
When the viscosity is under 10.000cps and contains large particles ( Material has a diameter greater than 6.3mm and less than 63mm – flapper valve may be required)
Other technologies the SaniForce Bin Unloading System could replace
The Bin unloading system can replace Lift-and-Dump systems. Lift-and-Dump systems are used to transfer big amounts of materials stored in containers. During the lift-and-dump process containers are lifted to variable heights through open air, than the container is tilted so the product can fall out, which brings several risks for workers and their surroundings. After every dump you still have to scrape the walls of the container manually which is work and time intensive.
Also there is a bigger chance of injuries on the work floor as operators often have to hang over stairs to reach the remaining product in the container. Likewise overstretching is one of the main injuries when working with a lift and dump system. Another risk is the big amount of product falling from a height which can impact or even damage the hopper system.